"Happy customer"
Remus Ambrus on 5/12/2022 7:15:43 AM
Rating:
Review: Romanian customer, installed today, 1 year after GMan CarbWorks. (I have spare carbs for VL1500 used in this time). I don't know enough English to describe satisfaction. Thanks GMan, another carbs will be sent to you.
"The works!"
James Reich on 4/26/2022 10:28:49 AM
Rating:
Review: Sent my carbs off my 2004 vl1500 for the works, Gary informed me my carbs were in too good of shape for that service so he rejetted the carbs and gave me back a credit to me that a very honest thing to do! Once I reinstalled the carbs, air filter and fuel filter the bike fired right up and runs so much better than it did off the showroom floor! I highly recommend having Gary do work whatever it may be!!
"carb fix 2003 intruder 1500"
ed Shaw on 5/20/2021 1:30:55 AM
Rating:
Review: My bike is now amazing , i got the filter and plugs to go with my carb rework from GMan and am now getting on average 43 miles to the gallon. I have a lot more torque/power. On a cold start I pull the choke for around 20 seconds or so then completely off , it just sits there idling, no stalls. Was not like that before the rework!! Also i had many questions as this was a new bike to me with many things i was not use to, i would e-mail GMan from the other side of the country and usually get a answer the same day, or if i called a call back the same day. it did take 3 weeks to a month to get my carbs back but was so worth it!
"Awesome"
Tom terrell on 7/4/2020 7:21:50 AM
Rating:
Review: Got my carbs back reinstalled them and right from the start I thought I had a new bike. I went from 17 mph to 31.9 mpg. No more pop pop popping from the exhaust. No more black exhaust. Now the o'girl has the get up and go like a beast. Just awesome. These folks know what they are doing.
"needle jet rebuild"
Jerry Gallant on 6/18/2020 4:39:18 PM
Rating:
Review: awesome sums it all up, like having a new bike thanks guys!
"Needle jet rebuild"
Josh Payne on 5/21/2020 6:20:10 AM
Rating:
Review: GMan is very responsive to any and all questions I had. I previously had factory pro needle jets put in and didn't have a great experience. They wore out very fast and then I couldn't get in touch with factory pro about replacement. I was getting 20 mpg before and got 38mpg from my last tank after the GMan rebuild! And that was with an increase in elevation of 2000 ft every day to work. Couldn't be happier with Gary's work.
"GMan Will Do What He Says He Will Do"
Brian Shorey on 3/4/2019 12:38:26 PM
Rating:
Review: I sent carbs to GMan and after some fine tuning I am very happy with the improvements in power and drive-ability. Lots more power everywhere. All as advertised. Great communication. I'm very satisfied would transact again
"Carbs!!!"
Nicholas on 8/21/2018 11:56:23 AM
Rating:
Review: Awesome... fast service, sent in carbs and got them back quick. I installed them and the bike ran flawlessly! I have aftermarket exhaust, I purchased the k&n filter kit and everything was dialed in perfectly. I had question about bike 700 miles after install and GMan emailed me and communicated with me very quickly to help me. Awesome grade A service and products!!!THANKs!!!
"Carb Cleaning Service"
Herb Dale on 6/25/2018 7:13:35 AM
Rating:
Review: had carbs cleaned and serviced, wow what a difference,went on 186 mile trip and bike ran flawless thanks guys great work . Herb and Sylvia Kingman Arizona.
"carb needle jet repair"
Michael Culley on 9/3/2017 7:51:10 PM
Rating:
Review: Carbs work great. Started right up and ran like new. Felt great to cruise thru town and not see black smoke and have popping sounds!
"Stage 3 Jet kit rebuild."
Michael Donnelly on 8/17/2017 3:25:47 PM
Rating:
Review: Last year I had my mechanic put a dyno jet kit in my carbs. He did a good job however these carbs do not except anything but oem. Well I didn't know it and obviously neither did he...hahahaha ... I sent my carbs out to GMAN and bamm its like brand new. I know now what I have been missing all this time. The service was the best. I got an e-mail telling me the carbs were done and shipped on Monday and on Wednesday they were here. Gary you do amazing work... I am glad I listened to you and some new friends on the Forum. Thanks Again. Michael
"Huge MPG increase, huge power increase, and super fast turn time!"
Charlie Cox on 7/6/2017 10:12:56 AM
Rating:
Review: You Sir are a FREAKING WIZARD! They carbs are doing awesome! I went from 25 mpg and the bike sputtering at constant speed to 38.4 mpg and no sputter! I just rode it from Lake Stevens WA to Aldergrove British Columbia up HWY 9 and it did great. Great gas mileage and had plenty of power every time I rolled on the throttle coming out of the curves. And not saying I committed the heinous offense of hitting triple digit speed on one of America's highways, but I am now positive that I can easily go from 70 mph to 110 mph quickly should the need arise! So thanks again for all of your work on my carbs and a special thanks for the super fast turn time on them!
"Great service"
Jay Wells on 6/30/2017 11:56:33 AM
Rating:
Review: Bike runs better now than it ever has. More power is great but the part that stands out is the Service and the advice. Worth every Penny
"GMan is the only one I trust."
David Ratliff on 6/29/2017 7:38:57 PM
Rating:
Review: GMan is the only one I trust, I won't let anyone else touch my carbs. He's friendly, responds himself on Facebook messenger, and the prices are great for the service you get! Seriously, I got the needle jet service but had "OEM" needles from a big internet parts store. Because of the material they were made of it wore my carbs out, fast. GMan honors his lifetime warranty and repaired my needle jets. He knows the products he's selling, too. I bought tires from him, the Dunlop set for a VL1500, and just like he said, they stick even when the rode is wet. Any time I need advice, on the carbs or anything else on the bike, he answers the call or message. He's friendly and, he cares. He's earned a customer for life.
"Needle Jet Service"
Duane Feldman on 3/4/2017 6:53:23 AM
Rating:
Review: Awesome service, easy to work with. Had my carbs back in 5 business days with complete instructions to reinstall and suggestions for better torque, which I am doing. Thanks GMan for all you do!