Whole Nine Yards Service for VL1500

Our Products: Performance > CarbWorks - VL1500 LC > Rejetting Services

SKU: PF-CWNYS15

Suzuki VL1500 Poor Mileage, Low Power, Running Rich? We rebuild, rejet, install new Needle Jets, Slides and Diaphragms and ship back to you in just over a week. You simply reinstall and ride. Our work is Guaranteed for the life yo own your bike! More details...

MSRP: $643.88

GMan's Price: $579.95

You Save: $63.93 (10%)

Air Filter Type:
Elevation Selection:
Exhaust Style:

Add to Cart

Product Details

Restoration for Neglected Carbs!!!

The Whole Nine Yards Service is for the
Suzuki Intruder VL1500, 1998 - '04

Restoration for Neglected Carbs!
We will Replace Diaphragms, Broken Slides,
Worn Needle Jets (Emulsion Tubes), Install New OEM Needles, Main Jets,
and Pilot Jets, Set Floats, Fuel Screws, TPS and Static Bench Sync
to make your carbs run like new and better.

If you Add GMan's exclusive K&N Air Filter the GMI-1598
we will rejet your carbs for maximum Power and Performance!

We guarantee our CarbWorks Services for as long as you own your bike!

Whole Nine Yards Service Includes:

New Diaphragms & Replace Broken Slides in both Carbs.
Installation of GMan's New Custom/Proven Needle Jets.
Rejetting both carbs per your Setup, Pipes and Elevation.
Cleaning and Inspect all parts.
Replace w/genuine Mikuni Jets.
Replace w/OEM Needles and Shim appropriately.
Readjust TPS (Throttle Position Sensor)
Adjust & Clean Floats
Clean and Set Fuel Screws
Static Bench Sync Carbs
All you do is Reinstall and Ride.

You simply remove and ship your carbs. When returned simply install, ride and enjoy. We typically see a 36% increase in performance over OEM setup, while getting 38-42 mpg based on your right wrist!
(Please let us know if you carbs are leaking or have other issues hindering their operation or longevity, so we can address the issue. Minor External Fuel Screw Adjustments may be required to match variations with your motor or location specifics.)

Carb Removal Procedure:

(Click here to view Carb Removal Procedure PDF

)

Include this Packing Slip when sending carbs for Needle Jet Rebuild Service:

(Click here to print Required Packaging Slip for your Carb Shipment

)

Procedure: Place your order, remove your carbs - leaving them bolted together, drain all fuel, seal in 1 gallon Zip-Lock bag, add generous amounts of packing in box and mail via United States Postal Service (USPS) Priority Mail Flat Rate adding insurance for security.

Ship to:

GMan Industries, Ltd.
CarbWorks Division
31707 N 167th Ave
Surprise, AZ 85387

Shipping/Handling Information:

Shop time 5-7 Business Days

We guarantee our Needle Jets from wear for as long as you own your bike.
(Normal carb wear and tear not included)

You simply pay shipping each way and we verify and readjust all settings, guaranteed.

GMan Related Products

Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. (

) indicates a required accessory.

GBushing VL1500

Sale Price: $49.95

Product Reviews

Average Ratings: Empty Star

Rating:

>> Read all product reviews [27] | Write your own review

Rate this product:

"Whole 9"

Michael Jacobs on 2/6/2022 9:02:32 AM

Rating:

Empty Star

Review: Excellent service and turn around time. Bike runs like new. Best money I've spent on the bike in years !

"Whole Nine Yards Service"

Andrew Williams on 9/14/2019 5:26:29 AM

Rating:

Empty Star

Review: My VL1500 LC was running so badly that I had considered replacing the motorcycle. I instead opted for the Whole Nine Yards service from GMan. Before the service, I was getting 25mpg and the bike ran horribly. After the service I have run two tanks of fuel and have consistently been getting 39mpg. Bike now runs strong. Be prepared to be without your carbs for a month or so as they are being rebuilt. A few weeks and a few hundred dollars is a small price to pay to get the old bike running like new... More details

"Whole Nine Yards Service for VL1500"

Jared Robinson on 4/21/2017 4:48:46 PM

Rating:

Empty Star

Review: I Was ready to sell MY 2000 VL1500, then I heard of Whole Nine Yards Service from GMan. After receiving carb Back from rebuild I Had trouble with the right carb flooding talked to Gary who instructed me to take the float cover off and found the float clip had moved during shipping. My 2000 VL1500 runs like a scared rabbit now. I give GMan a 10 Star rating. Thanks for the great service!

"Thank you for the whole nine yards"

Floyd Desrosiers on 10/2/2016 9:33:44 PM

Rating:

Empty Star

Review: Read other reviews time after time over the last 3 years,saying the LC running not that bad..... I hope. This spring it was all over but the crying. Called GMan talked to Gary . Explained that I ran the carbs into the ground. Gary explained he had never been beat by a set of carbs yet. I told him you decide what you need to do. And do it .Gary did the Whole 9 Yards Service plus the KN filter. Got them back. Put everything on. The bike fired up in less then 3 seconds . Rode the bike to fuel up an... More details

"Whole 9 Yards on 146k bike"

Brian on 9/7/2016 5:27:33 AM

Rating:

Empty Star

Review: I set up my bike with a GMan stage three kit about 120,000 miles ago and haven't touched the carbs since. But on my last cross country trip I noticed my gas mileage and power falling off. I assumed the engine was just worn out.. But thought a carb rebuild might help. Sent my carbs to Gary and he had never seen a carb worn that bad with that many miles on it.. LOL So he did the Whole 9 yards on them. I got them back yesterday and had the bike back on the road with in an hour... OMG!! there is not... More details

>> Read all product reviews [27] | Write your own review